Loading - By gravity at 400 Mt. per hour via four inlets (one inlet on each
hold) located at a distance from bow of 30.78m, 56.07m, 85.53m, and

106.69m respectively.

Loading inlets are located on starboard side and distance from water line in full ballast is 12.15 m. Distance to shipside is 3.l m. 800 mm Inner dia.

Vessel can also load pneumatically at the same rate but subject to Owners approval on case by case basis.

Discharging -

Pneumatic: at 450 Mtons/hr via 3 lines (150Mtons/hr per line) of 10 Inches each located about 70 m from bow on starboard side. Discharge rate is based on 150 m Horizontal and 30 m Vertical with 3 soft bends of 90 degrees.
Average rates are based on clean shore pipes with free flow and no back
pressure, rates exclude stripping time.

Mechanical: at 150 Mtons/hr via bulk chute located on Port Side and about

69.5 m from bow. Maximum outreach of bulk chute is 8 m from ship side. Airdraft of bulk chute when vessel is fully loaded is about 6.44 m.